a2dbb7f4f8b4a032a6171a943d2d4517

Микросхема SN74ABT244ADW SO20

Поставка электронных компонентов в Уфу

54,88 руб.

x 54,88 = 54,88
Артикул: 1111746 Категории: ,
Сроки поставки выбранного компонента в Уфу уточняйте у нашего менеджера
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №110-12 дней54,88руб.51,04руб.49,39руб.48,29руб.45,00руб.43,90руб.42,81руб.39,51руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №25-7 дней99,33руб.91,10руб.89,45руб.87,26руб.81,22руб.79,58руб.77,38руб.69,70руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №35 дней128,42руб.118,54руб.115,80руб.113,05руб.105,37руб.102,63руб.100,43руб.90,00руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №47-10 дней65,86руб.60,37руб.59,27руб.57,62руб.53,78руб.52,68руб.51,04руб.46,10руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №55 дней126,77руб.116,89руб.114,15руб.111,41руб.108,11руб.104,27руб.98,78руб.88,91руб.

Характеристики

SN74ABT244ADW SO20The SN74ABT244ADW is an octal Buffer and Line Driver designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers and bus-oriented receivers and transmitters. This device provides the choice of selected combinations of inverting and non-inverting outputs, symmetrical active-low output-enable (OE) inputs and complementary OE and OE inputs. The SN74ABT244A is organized as two 4-bit buffer/line drivers with separate OE inputs. When OE is low, the devices pass non-inverted data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN74ABT244A is characterized for operation from -40 to 85°C.

• State-of-the-Art EPIC-IIB™ BiCMOS design significantly reduces power dissipation
• High-drive outputs
• Latch-up performance exceeds 500mA per JEDEC standard JESD-17
• Typical VOLP (output ground bounce)